Relative zero is the feature; absolute angle rarely is · review
A four-quadrant angle gauge stating ± 0.2°, aimed at relative angles between surfaces, with a magnetic base and a stated display size.
What the figures leave us with A properly specified four-quadrant gauge, available everywhere. The Mcbazel is cheaper; this reads through all four quadrants.
The straightforward four-quadrant gauge with its figure on the page.
A digital inclinometer with a measuring range of 4 × 90°, aimed at establishing relative angles between surfaces. An accuracy stated at ± 0.2 degrees. An LCD display measuring 3.5 × 1.7 cm (1.4 × 0.7 in), described as clear and easy to read. A powerful built-in magnet in the base, securing it to any iron surface.
Absolute angle — the angle to true horizontal — matters for slopes and falls. Most workshop angle questions are relative: is this blade square to this table, is this bracket at the same angle as that one. A gauge that zeroes on one surface and then reads the difference answers those directly, and does not care whether the workbench is level.
It sounds trivial and it is not. An angle gauge is read at arm’s length, often from an awkward position, and a small screen is the reason a tool gets replaced. Stating the dimension is more useful than the usual “large LCD”.
Read on the day this page was built: $20 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 31 August 2026. The live price is at the top of the page.
| Amazon reference | B01MFADV8S (identical on 6 markets) |
|---|---|
| EAN | 5060492195764 |
| Stated accuracy | ± 0.2° stated |
| Projected lines | 4 × 90° range |
| Reference and mounting | built-in magnets |
| Display | 3.5 × 1.7 cm (1.4 × 0.7 in) display |
The angle between two surfaces rather than between a surface and the horizontal. Neoteck states the gauge is aimed at establishing relative angles between surfaces, which is the common case: setting a blade to a table, a bracket to a wall.
The gauge reads 0–90° in each of four quadrants, so it keeps working as the tool passes through vertical instead of stopping at 90°.
On iron surfaces, yes — the maker states a powerful built-in magnet in the base.
8.3/ 10
A properly specified four-quadrant gauge, available everywhere. The Mcbazel is cheaper; this reads through all four quadrants.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on August 31, 2026.
Comparing two surfaces to each other — the job an angle gauge actually does most often.
Amazon reports what buyers took in the month before this page was last checked: at least 50.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for measuring instruments and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
± 0.2° stated · 0–90° · four reference faces · aluminum, splash-proof
A MEMS-based angle gauge stating ± 0.2° over 0–90°, in a splash-proof aluminum housing with all four faces usable as a measuring reference.
Best for: The value pick: a published figure, a metal housing and four reference faces for thirteen euros.
4 × 90° (360°) · four magnets · absolute and relative modes · backlit
A 360° angle gauge with four base magnets and both absolute and relative measuring modes — the second mode being the one most angle work actually needs.
Best for: Work that alternates between absolute slopes and relative angles without changing tools.
0–90° and 0–180° · magnetic base · V-groove for pipe and conduit
A trade angle gauge with dual 0–90° and 0–180° ranges and a V-groove machined around the base, so it sits on pipe and conduit instead of rocking on them.
Best for: Pipe and conduit bending, where the tool has to sit on a cylinder and stay there.
≈ $33
