Skip to content

Grade rods

AdirPro Grade rod, 14 ft, 4 sections, 1 mm (0.04 in) wall

Fourteen feet on four sections and the thickest wall on the shelf — on a page that cannot agree with itself about the graduation.

AdirPro 14 ft telescoping aluminum grade rod with bubble level

AdirPro Grade rod, 14 ft, 4 sections, 1 mm (0.04 in) wall

Fourteen feet on four sections and the thickest wall on the shelf — on a page that cannot agree with itself about the graduation.

Body and fittings
FOUR telescopic sections reaching 14 ft and collapsing to 51 in. Four sections for fourteen feet is the best length-per-joint ratio on this shelf — three and a half feet per section — against five sections for nine feet on another AdirPro here. Each joint is a creep point, so fewer is stiffer
Material
1 mm (0.04 in) thick, ± 0.05 mm (0.002 in), stated. It is the THICKEST published wall on this shelf — the only other figure given is 0.8 mm (0.03 in) — and on a 14 ft rod extended to its limit, wall thickness is what stops the top section bowing under its own weight
Scale
The TITLE says "10th Foot Graduations". The fourth bullet says "dual graduations of an engineer's scale feet/eights on the front and standard feet/inches on the back". Tenths and eighths are not the same scale and they are not interchangeable: an engineer's level is set out in tenths, and reading an eighths rod against it means converting every figure. Settle this on the order page
Stated dimension or range
14 ft extended, 51 in folded — both published, which only two rods on this shelf manage
Measuring mode
A bubble level, stated, and a rectangular section stated to ensure easy handling and flush alignment with flat surfaces. A special measuring scale on the back for overall height reading is stated without being explained
Supplied
A durable soft carrying bag with an adjustable shoulder strap. No spare lock button, unlike the maker's own 9 ft rod on this shelf, and nothing is published about the locking buttons at all
Amazon reference
B00KVJKWTY
EAN
0815236011238
  • Fourteen feet on four sections — three and a half feet per joint
  • 1 mm (0.04 in) wall, the thickest published on this shelf
  • Tenths in the title, eighths in the bullet

Best for: Reach with stiffness, where fourteen feet on three joints beats sixteen on four

≈ $45
Check price on Amazon

Specifications

Body and fittings
FOUR telescopic sections reaching 14 ft and collapsing to 51 in. Four sections for fourteen feet is the best length-per-joint ratio on this shelf — three and a half feet per section — against five sections for nine feet on another AdirPro here. Each joint is a creep point, so fewer is stiffer
Material
1 mm (0.04 in) thick, ± 0.05 mm (0.002 in), stated. It is the THICKEST published wall on this shelf — the only other figure given is 0.8 mm (0.03 in) — and on a 14 ft rod extended to its limit, wall thickness is what stops the top section bowing under its own weight
Scale
The TITLE says "10th Foot Graduations". The fourth bullet says "dual graduations of an engineer's scale feet/eights on the front and standard feet/inches on the back". Tenths and eighths are not the same scale and they are not interchangeable: an engineer's level is set out in tenths, and reading an eighths rod against it means converting every figure. Settle this on the order page
Stated dimension or range
14 ft extended, 51 in folded — both published, which only two rods on this shelf manage
Measuring mode
A bubble level, stated, and a rectangular section stated to ensure easy handling and flush alignment with flat surfaces. A special measuring scale on the back for overall height reading is stated without being explained
Supplied
A durable soft carrying bag with an adjustable shoulder strap. No spare lock button, unlike the maker's own 9 ft rod on this shelf, and nothing is published about the locking buttons at all
Amazon reference
B00KVJKWTY
EAN
0815236011238

What the maker puts in writing

  • 14 ft on four adjustable telescopic sections, collapses to 51 inches
  • “This high quality leveling rod is 1mm (0.04 in) thick (+/-0.05)”
  • Title: “10th Foot Graduations” · Bullet 4: “an engineer’s scale feet/eights on the front and standard feet/inches on the back”
  • Rectangular shape for easy handling and flush alignment with flat surfaces · bubble level
  • Special measuring scale on the back for overall height reading
  • Durable soft carrying bag with adjustable shoulder strap

Nothing about the locking buttons. No spare parts. No tripod thread.

Tenths in the title, eighths in the bullet

And it is not a detail.

Engineer’s levels and construction lasers are set out in feet and TENTHS. A tenths rod is read and written straight into the book.

An eighths rod has to be converted. Every figure. And conversion in a level book is where errors come from.

AdirPro sells this line in both, so one of the two statements belongs to the other model.

Settle it on the order page.

One millimeter, because the top section is a cantilever

Fully extended, the uppermost tube carries its own weight at the end of a long lever.

A thin wall lets it bow. A bowed top section tilts the scale and quietly changes the reading — the kind of error this shelf’s buying tip says you will not notice in the numbers.

One millimeter against the 0.8 mm (0.03 in) published elsewhere on this shelf is twenty-five per cent more wall.

It is the only hard figure about stiffness on this shelf, and four of the six rods publish none.

Three and a half feet per section

Which is the best ratio here.

Fourteen feet on four sections: three joints.

Another AdirPro on this shelf takes five sections to reach nine feet: four joints for two thirds of the length.

Each joint is a sliding fit that can settle under load.

The price is the bundle. Fifty-one inches folded — longer than the forty-two inches of a SIXTEEN-foot rod here, and it will not go behind a van seat.

Availability

On sale at around 45 € on the American Amazon store at the time of checking.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 8 October 2026. The live price is at the top of the page.

What gets asked here

Tenths or eighths?

The page says both and you must settle it before ordering, because it is the difference between reading a figure and converting it. The title advertises 10th-foot graduations; the fourth bullet states an engineer's scale in feet and EIGHTHS on the front. Engineer's levels and construction lasers are set out in tenths, so a tenths rod is read and written down directly — an eighths rod has to be converted every time, and conversion in a level book is where errors come from. AdirPro sells this line in both, so one of the two statements belongs to the other model.

Why does the wall thickness matter at fourteen feet?

Because the top section is a cantilever. Fully extended, the uppermost tube carries its own weight at the end of a long lever, and a thin wall lets it bow — which tilts the scale and quietly changes the reading, exactly the kind of error this shelf's buying tip warns is invisible in the numbers. One millimeter against the 0.8 mm (0.03 in) published elsewhere on this shelf is a twenty-five per cent increase in wall, and it is the only hard figure here about stiffness. Four of the six rods publish no thickness at all.

Four sections or five?

Four, for stiffness; five, for storage. This rod reaches fourteen feet on four sections — three and a half feet per section, the best ratio on this shelf — which means three joints rather than four or five. Every joint is a sliding fit that can settle under load. The price is the fold: fifty-one inches, which is longer than the forty-two inches of a sixteen-foot rod on this shelf and will not go behind a van seat. Reach and stiffness here, bundle length there.

More grade rods and measuring staffs

  • AdirPro 9 ft telescoping grade rod with large locking buttons

    AdirPro Grade rod, 9 ft, 5 sections, 8ths

    The only rod on this shelf that ships a spare for the part that actually fails.

    Supplied
    A REPLACEMENT LOCK BUTTON is included in the package, stated — the only spare part supplied with any rod on this shelf. This shelf's buying tip says to check that every section locks positively, because a staff whose middle section creeps adds an error you will not notice in the numbers; the lock button is that part, and it is a small sprung plastic component that breaks. A carrying bag is included as well
    Body and fittings
    LARGE locking buttons, stated to lock the sections securely and prevent slippage. Five telescopic sections in thick aluminum alloy and plastic, stated 100% waterproof and corrosion-resistant — the only rod here to claim waterproof rather than weather-resistant
    Stated dimension or range
    9 ft extended on five sections. No folded length is published, which on a five-section 9 ft rod would be about two feet. One rod on this shelf reaches 14 ft on four sections
    Scale
    Red foot markings for maximum visibility, stated ideal for use with construction lasers and optical surveying equipment, with a backside scale for overall height reading measured in 8ths. Eighths rather than tenths: eighths read naturally against a tape and tenths against an engineer scale, and the two are not interchangeable
    Material
    Thick aluminum alloy and plastic, stated. No thickness figure appears, where two rods on this shelf publish one
    Reference and mounting
    A rectangular section, stated to give an easy grip while taking measurements. No tripod thread and no receiver clamp is published
    Amazon reference
    B00KVJKSH0
    EAN
    0815236011214
    • A spare lock button in the box, unique on this shelf
    • Large locking buttons, stated against slippage
    • Five sections for nine feet, where a rival does it in three

    Best for: Interior and foundation work where nine feet is enough, by somebody who has had a lock button fail

    ≈ $43
    Check price on Amazon
  • DEWEPRO telescopic measuring staff with its base plate on soft ground

    DEWEPRO Telescopic leveling staff, 5 m (16 ft) with base

    A 5 m (16 ft) staff supplied with its base plate — the part that decides whether the staff stands where you put it rather than sinking into the ground.

    Amazon reference
    B082YCC391 (identical on 3 markets)
    EAN
    4016515038014
    Body and fittings
    5 m (16 ft) telescopic
    Reference and mounting
    base plate included
    • A base plate is included, which most staffs do not supply
    • Telescopic to a stated 5 m (16 ft)
    • No material, section count or scale detail published

    Best for: Leveling on soft or uneven ground, where the foot of the staff needs somewhere solid to sit.

    Search Amazon for this model
  • heninhill telescopic height measuring rod extended against a bridge soffit

    heninhill Telescopic height rod, 6 m (20 ft)

    The longest rod here at 6 m (20 ft), folding to 110 cm (43.3 in) to fit a vehicle cab, with a small gear mechanism for precise horizontal setting.

    Amazon reference
    B0F2F9MCR4 (identical on 6 markets)
    EAN
    0740863925040
    Stated dimension or range
    6 m (20 ft) · folds to 110 cm (43.3 in)
    Scale
    dual metric and imperial scale
    Body and fittings
    gear adjustment
    • Six meters, the longest reach in this hub
    • Folds to a stated 110 cm (43.3 in), so it travels in a cab rather than on a roof
    • Aimed at vehicle height measurement rather than leveling

    Best for: Checking clearances and heights — bridges, doorways, loads — rather than leveling to a laser.

    Check price on Amazon

Elsewhere in the spares drawer

  • Warriors 9 volt alkaline block batteries in their four-pack

    Warriors 9 V alkaline batteries, four-pack

    The cheap four-pack for instruments that run on a 9 V block, with a stated three-year shelf life — the figure that matters for a cell that sits in a drawer.

    Amazon reference
    B0BYD6PXZH (identical on 6 markets)
    EAN
    9358199002307
    Power
    9 V 6LR61 · stated three-year shelf life
    Supplied
    four-pack
    • A stated three-year shelf life, which is the relevant number for an instrument used twice a year
    • A design the maker describes as protecting the device, with leak resistance in mind
    • No leak-protection guarantee published beyond the description

    Best for: Instruments used often enough that the cell is replaced before it ages.

    Check price on Amazon
  • VARTA 9 volt alkaline block batteries in recyclable packaging

    VARTA 9 V alkaline batteries, four-pack

    The four-pack from a manufacturer that makes its own cells rather than badging them, at twice the price of the no-name pack.

    Amazon reference
    B0BTYPS4PW (identical on 6 markets)
    EAN
    4008496059133
    Power
    9 V alkaline
    Supplied
    four-pack · recyclable packaging
    • Made by a cell manufacturer rather than a rebrander, stated as produced in Germany
    • Four in a pack, in recyclable packaging
    • No shelf life figure published, unlike the cheaper Warriors pack

    Best for: Instruments you intend to keep, where the cell is the cheapest insurance available.

    Check price on Amazon
  • AdirPro LD-8 universal rotary laser detector with dual display and rod clamp

    AdirPro Rotary laser detector, red only, 2000 ft

    The only receiver here that publishes how fine it can split the beam — and the only one that admits its range belongs to the laser.

    Stated accuracy
    TWO accuracy bands: ±1/16 inch (1 mm) and ±1/8 inch (2.5 mm), stated, with the detector directing the user to position the laser higher or lower on the rod. It is the ONLY receiver on this shelf to publish bands at all, and this shelf's introduction lists them as one of five comparisons — a fine band finds grade slowly and precisely, a coarse one finds it fast
    Stated dimension or range
    A working range of 2000 feet — "depending on laser", stated. That qualification is the only honest one on this shelf: a receiver reveals the laser's range rather than creating it, and two thousand feet describes what a rotary laser can throw, not what this box can do alone
    Functions
    ROTARY lasers only, and RED only: compatible with most standard red rotary lasers, stated, working in all lighting conditions. It is the only receiver on this shelf that will not serve a line laser, and the only one that will not see a green beam — which rules out most of the cross-line lasers on this site
    Display
    A dual-sided crisp LCD showing elevation, grade sensitivity, and audio and battery status. Showing the SENSITIVITY on the screen is the detail that makes two accuracy bands usable: you can see which band you are in rather than remembering
    Measuring mode
    A built-in bubble level, stated. On a detector clamped to a rod that is the check that the receiver itself is not tilted, which would offset every reading by the same amount
    Power
    A 9 V battery giving approximately 40 working hours, with auto shut-off after 10 minutes of inactivity. Forty hours against about seventy on another receiver here
    Ingress protection
    IP55, dustproof and water-jet resistant, in a hard plastic housing with a rubber casing. IP55 is the highest rating on this shelf, where the other two are IP54 — jets rather than spray, which on a grading job in the rain is the relevant one
    Supplied
    A rod mounting bracket with 1/4 inch threading on the nut and screw, stated included. This shelf's introduction asks about clamp fit; 1/4 inch rather than 5/8 means it suits a compact rod rather than a survey tripod
    Amazon reference
    B00YNTC4CQ
    EAN
    0815236013416
    • Two published accuracy bands: ±1/16 in and ±1/8 in
    • The grade sensitivity shown on the display
    • Red only: it will not see a green beam

    Best for: A red rotary laser on a grading job, where the difference between 1 mm (0.04 in) and 2.5 mm (0.10 in) decides the fall

    ≈ $85
    Check price on Amazon

All grade rods and measuring staffs