Relative zero is the feature; absolute angle rarely is · review
A 360° angle gauge with four base magnets and both absolute and relative measuring modes — the second mode being the one most angle work actually needs.
What the figures leave us with Good modes, four magnets, no published figure. Hard to recommend over the cheaper gauges that state theirs.
Everything specified except the number.
A wide measuring range of 4 × 90°, a total of 360°. Four strong built-in magnets giving a magnetic foot for firm attachment to metal surfaces. A large, clear backlit LCD. Absolute and relative measuring modes: the gauge can be placed on a reference surface and zeroed to measure a relative angle.
Zeroing on a reference and reading the difference is what most angle measurement is. It removes the question of whether the bench, the floor or the machine is level, because none of those enters the answer. A gauge that does this well is more useful than one with a tighter figure and no zero.
Two gauges in this hub state ± 0.2° and cost less than half this. That is the comparison this listing invites and cannot answer, because it publishes no figure at all.
Catalogued and unsold: the American Amazon shop lists the reference with nobody behind it.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
| Amazon reference | B06XX8W7XZ (identical on 6 markets) |
|---|---|
| EAN | 0712962231780 |
| Projected lines | 4 × 90° (360°) |
| Reference and mounting | four magnets |
| Functions | absolute and relative modes |
| Display | backlit |
Absolute reads against gravity — the true angle to horizontal. Relative zeroes on a surface you choose and reads the difference from it. RISEPRO states you can place the gauge on a reference surface, zero it, and then read relative angles.
No figure appears in this listing. The Mcbazel and Neoteck gauges here both state ± 0.2°, and they cost less.
A single magnet is a pivot point; four spread across the base resist being knocked out of position, which matters on a vertical surface where the tool is holding its own weight.
8.1/ 10
Good modes, four magnets, no published figure. Hard to recommend over the cheaper gauges that state theirs.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on August 31, 2026.
Work that alternates between absolute slopes and relative angles without changing tools.
Amazon reports what buyers took in the month before this page was last checked: at least 100.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for measuring instruments and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
± 0.2° stated · 0–90° · four reference faces · aluminum, splash-proof
A MEMS-based angle gauge stating ± 0.2° over 0–90°, in a splash-proof aluminum housing with all four faces usable as a measuring reference.
Best for: The value pick: a published figure, a metal housing and four reference faces for thirteen euros.
± 0.2° stated · 4 × 90° range · built-in magnets · 3.5 × 1.7 cm (1.4 × 0.7 in) display
A four-quadrant angle gauge stating ± 0.2°, aimed at relative angles between surfaces, with a magnetic base and a stated display size.
Best for: Comparing two surfaces to each other — the job an angle gauge actually does most often.
≈ $17
0–90° and 0–180° · magnetic base · V-groove for pipe and conduit
A trade angle gauge with dual 0–90° and 0–180° ranges and a V-groove machined around the base, so it sits on pipe and conduit instead of rocking on them.
Best for: Pipe and conduit bending, where the tool has to sit on a cylinder and stay there.
≈ $33
